Zibro Heaters LCSL530 NF Approved Laser Paraffin Heater 4.65kW

Zibro Heaters LCSL530 NF Approved Laser Paraffin Heater 4.65kW Zibro Branded WICKLESS DESIGN: Provides clean and economical heat without wick maintenance or replacement. Heating rooms up to 190m3 SAFETY DEVICE: The zibro heater is equipped with a Tip-over Switch, Ignition Safety Device, Burning Control Device, Safety Device for Power Outage, High Limit Switch (Overheat Protector), Incomplete Combustion Preventive Device (Flame Rod, Burner Thermistor). SAVE MODE: In addition to the existing 5 cycle burning mode, also a burning stop-operation is available to prevent overheating the room. COOL TOP CABINET: Prevents accidental contact burns. BUILT-IN FAN: Circulates a clean, cosy, even warmth throughout the room. INFORMATION MONITOR: An information monitor allows you to keep track of all important heater functions including the weekly timer. SEMI-AUTOMATIC OPERATION: Features a 24-hour programmable timer and an integrated thermostat controller to maintain the desired room temperature. It offers 5 cycle burning mode (High  Med-High  Med  Med-Low  Low). MOTION DETECTOR SENSOR: This sensor signals every single movement in a room. The sensor detects movements as far as 7 meter. If the sensor does not detect movements for 10 minutes then the heater will automatically switch to a lower combustion level. As a result less fuel will be used. BACK UP SYSTEM: In case of a power failure the heater will be switched off. To retain the memory settings, the power has to be restored within approximately 10 minutes. PARENTAL CONTROL: When this button is pressed, the operation of buttons will be blocked, except the on/off button. REMOTE CONTROL: The heater is provides with an ‘easy to use’ remote control to activate the main functions of the heater.